Just another WordPress.com site

Acid-Etch Glass

Acid-Etch glass is perfect for both interior and exterior applications. They are found in many residential applications such as home decoration and furniture components. Some of the suggested applications are: interior partitions, shelving, interior and exterior doors, railings, furniture components, shower and bath enclosures, and more. Let your imagination decide the perfect application for your projects.

Acid-Etch Glass comes in a variety of colors
and thicknesses
and are offered in 3 different finishes
Satin Clear finish is characterized by its highly poclished
surface and high light transmittance.

The velour finish is characterized by its smooth surface and lower light transmittance providing a higher level of opacity.
Opaque finish is also available upon request which is a frosted appearance with less light transmittance and less polished surface

Table of all available Acid- Etch Glass


Below are some of the many shapes you may select from for your glass needs:

If the shape you need is not displayed we can probably still create it for you

Please contact us to verify that we can cut the shape you desire with either a drawing, picture or diagram of the shape. A pattern is required before we can cut the glass for you. This pattern is usually created from paper, wood and/or cardboard.


we offer the following types of fabrication to accommodate for the many applications of mirror:

  • Cutting by Hand
  • Notches
  • Finger Pulls
  • Drilled Holes
  • Cutouts (Examples: light switches, electrical outlets, telephone jacks)
  • V-groove
  • Edge Work
  • Polishing
  • Laminate
  • Tempering
  • Painting (non etch surface only)
  • Silvering (non etch surface only)
  • installation


This is the shaping or finishing of the edges of a glass surface, usually by grinding with an abrasive wheel. Pencil Polished edge in a Satin finish (also available in clear finish) is the most common type of edgework on mirrors. Although this is not as common on mirrors as it is on glass. Beveled edges can also be applied to any of these edge finishes. See the Beveling section


This is the production, by abrasion, of a sloping edge on the glass sheet which is commonly used on mirror glass. Beveling of mirror edges creates a very elegant and lavish appearance. It is often used for wall and vanity mirrors. The beveling process uses diamond grinding wheels to remove a portion of the glass edge and then uses felt wheels and polishing compound to bring the edge to a shiny clear finish once again. The finished look can really enhance the overall appearance of any project that uses glass or mirror. See our gallery of beautiful Beveled mirrors

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s